加工合同

时间:2022-06-28 06:47:53 合同范文 我要投稿

精选加工合同范文

  this contract is made by and between the buyers and the sellers, whereby the buyers agree to buy and the sellers agree to sell the under mentioned commodity according to the terms and conditions stipulated below:

精选加工合同范文

  买方与卖方就以下条款达成协议:

  1。 commodity:

  item no。 description

  名称及规格 unit

  单位 qty

  数量 unit price (fob chongqing)

  ($)单价 amount (fob chongqing)

  ($)总价

  1 mould of plough vd0 and vd00 sets 1 4847。36 4847。36

  2 mould of furrower ae0 and ae1 sets 1 2371。94 2371。94

  mould total value:us $7219。3(say u。s。 dollars seven thousand two hundred and nineteen point three only)

  3 plough vd0 sets according to order 37。36 according to order

  4 plough vd00 sets according to order 35。36 according to order

  5 furrower ae0 without sgc93 sets according to order 6。90 according to order

  6 sgc93 sets according to order 3。67 according to order

  7 furrower ae1 sets according to order 11。50 according to order

  total value:us $ according to order(say u。s。 dollars according to order only)

  other terms 1:

  in the future, if the steel floating price will change no more than ±5%, the quotation is no change; if the steel floating price will change more than ±5%, the price be fixed by through negotiation by both sides。 the table below list the steel price now。

  附1:如果卖方国内市场钢材价格浮动小于或等于±5%,以上产品价格不作变动;如果钢材价格浮动大于±5%,由买卖双方协商价格变动幅度。以下列出所用主要钢材现行价格:

  q235 0。56 δ3 δ10

  65mn 0。85 δ4 δ15

  45# 0。74 δ5 φ14

  δ2 0。64 δ6 φ22

  other terms 2:

  in the future, if the current rmb price of the us dollar will change between 7。5~7。7, the quotation is no change; if the current rmb price of the us dollar will change exceed 7。5~7。7, the price be fixed by through negotiation by both sides。

  附2:如果人民币与美圆汇率在7。5~7。7区间浮动,以上产品价格不作变动;如果汇率浮动超过此区间,由买卖双方协商价格变动幅度。

  2。 country and manufacturers:

  原产国及制造商: china chongqing sanxia machinery factory XX市北碚三峡机械厂

  3。 packing:

  vd0 and vd00: in steel shelf 钢架包装

  ae0 and ae1:in cartons with ribas’s brand。 带ribas商标的纸板箱包装

  4。 shipping mark:

  at buyer’s option 买方选定

  5。 time of shipment(装运期):

  open moulds and deliver samples: within 80 days after receipt of t/t

  开模具及送样:卖方收到外汇现金80天内送样

  formal order: after buyers confirm sample and then confirm order, within some days after receipt of t/t, to confirm times according to order。

  正式定单:在买方确认样品及正式定单后,卖方收到外汇现金一定时间内装运,具体时间根据订单确定。

  6。 port of shipment(装运港): chongqing ,china

  7。 port of destination(目的港):barcelona , spain

  8。 insurance(保险):to be covered by buyers for 110% invoice value against all risks。

  9。 payment(付款方式):

  t/t 100%

  外汇现金结算付款, 买方给卖方开出100%外汇现金t/t。

  sellers’s bank information:

  卖方银行资料:

  10。 shipment:

  the sellers shall ship the goods within the shipment time from the port of shipment to the destination。 transshipment is allowed。 partial shipment is not allowed。

  定作方:____________

  承揽方:____________

  签订地点:

  签订时间: 年 月 日

  一、品名或项目、规格型号、数量、单价、金额、交货期限

  定作物品 价款或酬金 交货数量及交货期限

  规格型号计量单位数 量

  名或项目 单价总金额合计

  二、定作方带料

  ·服装加工合同 ·钢筋加工合同 ·加工贸易合同 ·进料加工合同

  材料名称规格型号计量单位数 量质 量提供日期消耗定额单 价总金额

  三、质量要求、技术标准

  四、承揽方对质量负责的条件及期限

  五、技术资料、图纸提供办法及保密要求

  六、验收标准、方法和期限

  七、包装要求及费用负担

  八、交(提)货方式及地点

  『』

  九、交付定金预付款数额及时间

  十、结算方式及期限

  十一、违约责任

  十二、如需提供担保,另立合同担保书,作为本合同附件

  十三、解决合同纠纷的方式:执行本合同发生争议,由当事人双方协商解决。协商不成,可向人民法院起诉

  十四、双方协商的其它条款

  定作方 承揽方

  单位名称(章) 单位名称(章)

  单位地址: 单位地址:

  法定代表人: 法定代表人:

  年月日 年月日

  有效期限: 年 月 日至 年 月 日

  单位名称:(甲方)________________________________

  单位名称:(乙方)__________

  第一条、工程概况

  1、工地名称:____________________________________

  2、工地位置:____________________________________

  3、门窗面积:____________________________________

  4、工程时间_____天(因受风、雨、停电等不可抗拒因素影响工期顺延)。

  5、工程单价:_______元,预计工程量______平,工程总造价_______元(结算按照实际平数计算)。

  6、安全施工:乙方应安全施工,如造成事故责任和因此发生的费用,均由乙方承担,与甲方无关。

  第二条、付款方式:

  1、甲、乙双方签字后甲方支付乙方工程款______元。

  2、工程量完成至上框,甲方付乙方______元。

  3、工程量完成至上扇, 甲方付乙方______元。

  4、安装结束后经甲方验收合格签字后,应支付工程总造价的_______元,剩余______作为保修金,保修期满后无条件支付,保修期为___年。

  第三条、门窗要求:_________________________________________

  ___________________________________________________________

  ___________________________________________________________

  第四条、质量要求:

  1、乙方按设计图纸施工。若设计变更通知设计单位,严格遵守国家有关施工规范施工。如不遵守施工规范,损失由乙方负责。

  2、施工过程当中,甲方提出变更原设计方案,更改部分的造价另签。

  第五条:如出现合同外事宜由甲乙双方协商解决。

  第六条:本合同一式三份,都具有法律效力。

  甲方(盖章):____________ 乙方(盖章):_____________

  地址:___________________ 地址:____________________

  法人代表人:_____________ 法人代表人:______________

  电话:__________________ 电话:___________________

  手机:__________________ 手机:____________________

  日期:__________________ 日期:____________________

【加工合同】相关文章:

加工合同07-26

加工的合同06-22

加工的合同07-03

生产加工合同04-12

食品加工合同05-06

工业加工合同04-30

印刷加工合同07-05

委托加工合同05-31

加工制作合同06-20

机械加工合同06-17